Workshop table with samples of plywood, oak, OSB, moss, grass, carpet and aluminium, a drawing and a scale model (AI-generated image)

Materials

With their fire class and data sheets

The materials we build with, each with its reaction-to-fire class, and the manufacturers' data sheets to download.

Download the materials sheet PDF, 150 KB

Highlights

Fire-retardant boardB-s1,d0 from 12 mm and B-s2,d0 at 9 mm Vista 27 artificial grassCfl-s1 without sand or chemical retardants, and Bfl-s1 with sand Preserved mossM1 with the moss manufacturer's certificate, and B-s2,d0 for the 9 mm panels Lacquered aluminium

Boards

Fire-retardant board

Fire-treated fibreboard (MDF) and plywood, for furniture, walls and panels.

Reaction to fire
B-s1,d0 from 12 mm and B-s2,d0 at 9 mm (UNE-EN 13501-1)
Where it's used
Counters, display units, cabinets, totems and walls.

The joints are screwed, with threaded inserts, embedded nuts and beech dowels, so the furniture can be put together and taken apart without breaking it.

Birch plywood

For visible pieces and ramps. On ramps it has an anti-slip varnish.

Reaction to fire
Dfl-s1 as flooring (UNE-EN 13501-1)
Where it's used
Ramps, edges and visible pieces.

OSB and fir platform

OSB board on fir battens, in modules that come apart.

Reaction to fire
It goes under the carpet, which is what meets the venue's floor class
Where it's used
The stand platform.

Finishes

Water-based lacquer

Lacquered in a spray booth with water-based lacquer, low in volatile organic compounds, in your brand colour.

Where it's used
Cabinets, panels and coloured pieces.

3M DI-NOC architectural vinyl

Self-adhesive film with wood, stone or metal finishes.

Reaction to fire
B-s1,d0 (UNE-EN 13501-1)
Where it's used
Fronts and panels.

Flooring

  • White
  • Light grey marl
  • Pearl grey
  • Grey marl
  • Mid grey
  • Anthracite grey
  • Charcoal grey
  • Black
  • Sahara
  • Beige
  • Taupe
  • Green marl
  • Dark green
  • Grass green
  • Turquoise blue
  • Lime
  • Turquoise marl
  • Ducados blue
  • Deep blue
  • Indigo blue
  • Royal blue
  • Navy marl
  • Violet
  • Plum
  • Fire red
  • Red
  • Red marl
  • Burgundy
  • Yellow
  • Bright orange
  • Fuchsia
  • Marble
  • Beige marl

Exhibition carpet

Polypropylene and latex-free, in 33 colours.

Reaction to fire
Bfl-s1 (UNE-EN 13501-1)
Where it's used
The stand floor, laid on the platform or with removable tape.

We order it with its reaction-to-fire certificate.

Vista 27 artificial grass

27 mm grass by Intercésped, with light and dark green yarn and a curly brown layer underneath, like real grass. It contains no lead or cadmium.

Reaction to fire
Cfl-s1 without sand or chemical retardants, and Bfl-s1 with sand (UNE-EN 13501-1)
Where it's used
Green floors and walls on the stand.

It reaches Cfl-s1 without added fire retardants, according to the manufacturer's data sheet.

Green

Preserved moss

Stabilised natural moss on fire-retardant MDF panels, fixed with solvent-free glue. It needs no watering and no light.

Reaction to fire
M1 with the moss manufacturer's certificate, and B-s2,d0 for the 9 mm panels
Where it's used
Walls and planters.

Rented live plants

Plants from a nursery, which go back there when the show ends.

Where it's used
At shows that allow it, on a waterproof platform and without watering them in the hall.

Graphics

Fire-retardant aluminium composite

Photos and signs on aluminium composite (Dibond FR) printed with UV inks.

Reaction to fire
B-s1,d0 (UNE-EN 13501-1)
Where it's used
Pictures, posters and signs.

Fire-retardant printed vinyl

Printed vinyl for both sides of a panel.

Reaction to fire
B-s1,d0 (UNE-EN 13501-1)
Where it's used
Graphic panels.

Lighting and electrics

LED lighting

3000 K LED strips inside aluminium profiles and LED track spotlights.

Where it's used
All the stand's lighting.

At CONAMA 2026, all the stand's lighting adds up to 265 W.

Halogen-free RZ1-K (AS) cable

If it burned, it would give off little smoke and no acid gases.

Reaction to fire
Cca-s1b,d1,a1 (Construction Products Regulation, CPR)
Where it's used
The stand's entire electrical installation.

Metal

Lacquered aluminium

Aluminium profiles and frames, coated in the project's RAL colour. They weigh a third of what steel would.

Where it's used
Fabric frames, picture frames, structures and screen mounts.

It is screwed together, taken apart and used again at the next fair.

Laser-cut steel

Plinths, supports and fittings, painted.

Reaction to fire
A1, non-combustible
Where it's used
Bases and load-bearing pieces.

3D printing

PLA

Plant-based plastic for scale models and 3D-printed pieces.

Where it's used
Scale models, letters and bespoke pieces.

Which materials do you want on your stand?

Tell us about your project We reply within 24 hours